So what cleaning should Roths fan installation and how to operate? In operation, it should be performed in accordance with regulations, and unnecessary troubles are prohibited. If the lubricant lacks the lubricant of the equipment, the fan will continue to run without oil. The impeller will conflict, the gear will wear each other, and then increase the load of the motor.

Only increase the burden on the motor to accelerate the loss. The problem of the Sanye Rockwitter itself is the quality problem of the factory. When installing a fan, many components are poorly combined, which will form a rating conflict. The Rogez Drum fan manufacturer's maintenance and part replacement rules. Based on the preparation of the blasting fault analysis, confirming the maintenance location and scale, and the preparation parts that may need to be replaced.

According to the structure of the parts, prepare appropriate inspection items and measurement tools. According to the quality of the blower, a large repair plan was formulated. Implement safety measures. When removing precautions, the size and direction of the important component should be marked in order to reset the check mark during the assembly process to prevent seizures.

For example, measure the thickness of various pads and records, measure the gaps of each part of the rotor and record, and summarize the main gear China Long Arm Paddle Wheel Aerator Manufacturers and the corresponding symbols on the ranging gears and the corresponding symbols on the altitude. Before installing the Ruz drum fan, you should clean and view the parts you want to use.

Regarding the disassembly components, the appearance of the processing should be protected and placed in accordance with certain rules. The parts in the same part, such as the bearing seat, the bearing cover and the adjustment of the same part, should be placed together. The lost parts should be included in a dedicated device. The matching application should be stored together. 

برچسب ها:
China Long Arm Paddle Wheel Aerator Manufacturers,

During the normal operation of Rutz drum fan, the temperature should not be higher than the specified value every 1 to 2 hours, and the temperature should not be higher than the specified value. The Rocky fan is very noisy when running. In order to reduce noise, in addition to installing the muffler, you can also use some simple methods to reduce noise, such as the grounding method.

The lubricant of the Razve Drum fan is replaced every 3 to 6 months, or the copper thread with a pore diameter of less than 50 microns is replaced once. After the first start, the working hours can reach 200 hours, and the oil should be replaced. The muffler should also be repaired every six months to replace some or all sound -absorbing materials. The air filter should be checked frequently, the import valve and the exit valve, and the bypass pipe should be kept in a good state. Fixed a problem immediately.

When the Rocky fan, when the top of the rotor is over the edge of the exhaust port, when the V0 space is connected to the exhaust side, the gas pressure on the exhaust side is very high, and some gas retus to the space, which suddenly increases the gas pressure.

When the rotor continues to rotate, the gas leaves the pump. Each concave curved surface of the rotor forms a working volume of the inner wall of the cylindrical body, China Fish Farming Pond Aerator and during the rotation of the rotor, when the gas moves near the exhaust port, the gas is taken away from the inhalation mouth. Due to high pressure, connect to the exhaust port. The gas is re -cycle.

At this time, the pressure in the working volume suddenly rises, and then the gas is transported to the exhaust channel. Two rotors work alteately. The two rotors do not contact each other, and the sealing parts are tightly controlled by the gap between them, so that the discharged gases are not polluted by lubricating oil. 

برچسب ها:
China Fish Farming Pond Aerator,